LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2002 >> Civic Si >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Alignment Specifications

WARNING: This page is about a different car, the 2005 Honda Civic, 2004 Honda Civic, and 2003 Honda Civic. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS

Application Preferred Range
Except Si Hatchback & Hybrid
Camber (1)
Front 0 -.75 To .75
Rear -.75 -1.5 To 0
Caster (1) 2.23 1.23 To 2.23
Toe-In (1)
Front 0 -.24 To .24
Rear .16 .08 To .32
Toe-In (2)
Front 0 -.12 To .12
Rear .08 .04 To .16
Toe-Out On Turns (1)
Inner 40.00 N/A
Outer 31.00 N/A
Turning Angle (1)
Inward Wheel 40.00 38.0 To 42.00
Outward Wheel (Reference) 31.00 N/A
Si Hatchback
Camber (1)
Front
2003 -.5 -1.25 To .25
2004-05 -.17 -.92 To .58
Rear
2003 -.92 -1.67 To -.17
2004-05 -.83 -1.58 To -.08
Caster (1)
2003 1.67 .67 To 2.67
2004-05 1.58 .58 To 2.58
Toe-In (1)
Front 0 - .24 To .24
Rear
Inspection
2003 .08 -.16 To .32
2004-05 .16 -.08 To .4
Adjustment .16 .08 To .32
Toe-In (2)
Front 0 (0) -.12 (-3) To .12 (3)
Rear
Inspection
2003 .08 (2) -.08 (-2)To .16 (4)
2004-05 .08 (2) -.04 (-1) To .2 (5)
Adjustment .08 (2) .04 (1) To .16 (4)
Toe-Out On Turns (1)
Inner
2003 34 N/A
2004-05 34.67 N/A
Outer
2003 28 N/A
2004-05 28.17 N/A
Turning Angle (1)
Inward Wheel
2003 34 32 To 36
2004-05 35.67 32.67 To 36.67
Outward Wheel (Reference)
2003 28 N/A
2004-05 28.17 N/A
Hybrid
Camber (1)
Front -.2 -.95 To .55
Rear -1 -1.75 To -.25
Caster (1)
Except AT-PZEV (ULEV) 2.33 1.33 To 3.33
AT PZEV (SU LEV) 2.17 1.17 To 3.17
Toe-In (1)
Front 0 -.24 To .24
Rear .16 .08 To .32
Toe-In (2)
Front 0 (0) -.12 (-3) To .12 (3)
Rear .08 (2) .04 (1) To .16 (4)
Toe-Out On Turns (1)
Inner 39 N/A
Outer 31 N/A
Turning Angle (1)
Inward Wheel 39 37 To 41
Outward Wheel (Reference) 31 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).