LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2002 >> S2000 >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> ABS Modulator-Control Unit Removal and Installation >> '00-03 Models: Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

'00-03 Models: Installation

  1. Install the ABS modulator-control unit, then tighten the two 6 mm nuts.
  2. Align the connecting surface of the ABS modulator-control unit 25P connector.
  3. Push in the lock of the ABS modulator-control unit 25P connector until you hear it click into place, then connect the connector.
  4. Bleed the brake system, starting with the front wheels (see BRAKE SYSTEM BLEEDING ).
  5. Start the engine, and check that the ABS indicator goes off.
  6. Test-drive the vehicle, and check that the ABS indicator does not come on.
scientia non olet · About LEMON Manuals