Camshaft Bearing

Tighten each bolt two turns at a time, in the sequence shown below, to ensure that the rockers do not bind on the valves.

Specified Torque

8 mm bolts: 20 Nm (2.0 kgf-cm, 14 ft. lbs.)
Apply engine oil to the bolt threads.
6 mm bolts: 12 Nm (1.2 kgf-cm, 8.7 ft. lbs.)
Apply engine oil to the bolt threads.
6 mm bolts: (11), (12), (13), (14)




Camshaft Pulley