Passenger's Window Switch Test/Replacement
Passenger's Window Switch Test/Replacement4-door
1. Remove the door grip cover.
2. Disconnect the 5P connector (A) from the passenger's power window switch (B).
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, remove the two screws and replace the switch.
2-door
1. Remove the screw and passenger's power window switch (A) from the door panel.
2. Disconnect the 5P connector (B) from the switch.
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified remove the two screws and replace the switch.