Passenger's Window Switch Test

Remove the switch panel (see DOOR PANEL REMOVAL/INSTALLATION step 2).
Remove the power window switch (A) from the door panel.
Disconnect the 5P connector (B) from the passenger's power window switch.

Fig 1: Disconnecting The 5P Connector From The Passenger's Power Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 2: Passenger's Window Switch Test Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, replace the switch.