Cruise Control Main Switch Test/ Replacement

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the driver's dashboard lower cover (see DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
Release the clips of the main switch, and push the main switch (A) out of the panel, then disconnect the 8P connector (B) from the main switch.

Fig 1: Pushing Main Switch Out Of Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to Fig 2 . If there is no continuity, replace illumination bulbs (A) or the switch.

Fig 2: Checking For Continuity Between Terminals In Each Switch Position
Courtesy of AMERICAN HONDA MOTOR CO., INC.