Shift Lever Installation

SRS components are located in this area. Review the SRS components locations, precautions and procedures in AIR BAG RESTRAINT SYSTEMS before performing repairs or service.

1. Install the shift lever assembly on the steering column.
   Fig 1: Installing The Shift Lever Assembly On The Steering Column

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Turn the ignition switch ON (II), and verify that the N position indicator comes on.
   Fig 2: Verifying That The N Position Indicator Comes On

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. If necessary, adjust the shift cable, and install the shift lever (see SHIFT CABLE ADJUSTMENT ).