Starter Circuit Troubleshooting: Notes
NOTE:
- Air temperature must be between 59 and 100 °F (15 and 38 °C) during this procedure.
- After this inspection, you must reset engine control module (ECM)/powertrain control module (PCM), using the Honda Diagnostic System (HDS) (see step 2 on HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM) ), otherwise the ECM/PCM continues to stop the fuel injectors.
- The battery must be in good condition and fully charged.
- If you disconnect the battery, do the power window control unit reset procedure (see RESETTING THE POWER WINDOW CONTROL UNIT ).