Tire Pressure Module: Service and Repair

TPMS Control Unit Replacement

NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the initiators and the tire pressure sensors.





1. Remove the clip (A), and disconnect the TPMS control unit connectors (B).

NOTE: The TPMS control unit is located under the steering column.

2. Remove the TPMS control unit with the bracket (C).





3. Remove the TPMS control unit (A) from the bracket (B).
4. Install the TPMS control unit in the reverse order of removal.
5. Connect the HDS and memorize the pressure sensor IDs. Do not memorize the IDs automatically.