Reverse Lock System Circuit Troubleshooting

Check whether DTC P0705 or P0706 is indicated.
Is either DTC indicated?
1. YES - Do the troubleshooting for the indicated code.
2. NO - Go to step 2.
Turn the ignition switch OFF.
Shift the shift lever to the P position while pushing the shift lock release.
Turn the ignition switch ON (II).
Press the brake pedal and release the accelerator, shift the shift lever out of the P position, and check that the shift lock solenoid operates.
Does the shift lock solenoid work properly?
1. YES - Check the reverse lock (shift lock mechanism). If the mechanism does not work, repair or replace the shift lever assembly.
2. NO - Do the Shift Lock System Circuit Troubleshooting (see SHIFT LOCK SYSTEM CIRCUIT TROUBLESHOOTING ).