DTC 84: VSA Sensor Neutral Position
- Do VSA SENSOR NEUTRAL POSITION MEMORIZATION .
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0), then turn it ON (II) again.
- Check for DTCs with the HDS.
Is DTC 84 indicated?
YES - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit (see VSA MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ), and retest.
NO - The system is OK at this time.