Hatch Lock Actuator Test

Remove the hatch trim panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 2P connector (A) from the actuator (B).

Fig 1: Identifying Hatch Lock Actuator 2P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check actuator operation by connecting power and ground according to the table below. To prevent damage to the actuator, apply battery voltage only momentarily.

Fig 2: Identifying Battery Power & Ground Connection Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the actuator does not operate as specified, replace it.