'09-11 Models
- Turn the ignition switch to LOCK (0).
- Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
- Push out the VSA OFF switch (A) from the back side of the instrument panel.
- Disconnect the VSA OFF switch 5P connector (B).
- On the switch side, check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be no continuity when the button is pressed, and continuity when the button is released.
- Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.
- Install the VSA OFF switch in the reverse order of removal.