Radiator Test
- Wait until the engine is cool, then carefully remove the radiator cap and fill the radiator with engine coolant to the top of the filler neck.
- Attach the pressure tester (commercially available) (A) to the radiator, and apply a pressure of 93-123 kPa (0.95-1.25 kgf/cm2
, 13.5-18 psi).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Inspect for engine coolant leaks and a drop in pressure.
- Remove the pressure tester.
- Check for engine oil in the coolant and/or coolant in the engine oil.
- Install the radiator cap.