Check these items before using the sensor input display mode
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to ON (II), and check the recirculation door function; press the recirculation button to switch from FRESH to RECIRC. The air volume and sound should change slightly.
- Set the driver's climate control switch to the desired test temperature:
- Press AUTO button on, the LED turns on.
- Press SYNC button off, the LED turns off.
When selecting the test temperature, note these items:
- "Lo" temperature setting will default to MAX COOL, VENT, and RECIRC.
- "Hi" temperature setting will default to MAX HOT, HEAT, and FRESH.
- 58 through 86 °F settings will use the automatic climate control logic.
- Turn the ignition switch to LOCK (0).