ABS Modulator-Control Unit Inputs and Outputs for 25P Connector
CONNECTOR TERMINAL REFERENCE
| Terminal number | Wire color | Terminal sign | Description | Measurement (Disconnect the ABS modulator-control unit 25P connector) | ||
|---|---|---|---|---|---|---|
| Terminal | Conditions | Voltage | ||||
| 1 | WHT | CAN-H | F-CAN communication circuit | - | - | - |
| 2 | GRN/BLK | FR+B | Detects right-front wheel sensor signal | - | - | - |
| 3 | BRN/WHT | FL-GND | Detects left-front wheel sensor signal | - | - | - |
| 5 | GRY/RED | RL-GND | Detects left-rear wheel sensor signal | - | - | - |
| 6 | GRN/YEL | RR+B | Detects right-rear wheel sensor signal | - | - | - |
| 8 | WHT/GRN | FSR+B | Power source for the fail-safe relay | 8-GND | At all times | Battery voltage |
| 9 | WHT/RED | MR+B | Power source for the motor relay | 9-GND | At all times | Battery voltage |
CONNECTOR TERMINAL REFERENCE
| Terminal number | Wire color | Terminal sign | Description | Measurement (Disconnect the ABS modulator-control unit 25P connector) | ||
|---|---|---|---|---|---|---|
| Terminal | Conditions | Voltage | ||||
| 10 | RED/WHT | K-LINE | Communication with HDS | - | - | - |
| 12 | BLU/ORN | FL+B | Detects left-front wheel sensor signal | - | - | - |
| 14 | YEL/RED | RL+B | Detects left-rear wheel sensor signal | - | - | - |
| 15 | BLU/YEL | RR-GND | Detects right-rear wheel sensor signal | - | - | - |
| 16 | PNK/BLU | IG1 | Power source for activating the system | 16-GND | Ignition switch ON (II) | Battery voltage |
| 17 | RED | CAN-L | F-CAN communication circuit | - | - | - |
| 18 | BLU | FR-GND | Detects right-front wheel sensor signal | - | - | - |
| 24 | BLK | GND | Ground for the ABS modulator-control unit | 24-GND | At all times | 0.1 V or less |
| 25 | BLK | MR-GND | Ground for the pump motor | 25-GND | At all times | 0.1 V or less |