J35A6 Engine
- Remove the battery (see BATTERY REMOVAL AND INSTALLATION
).
- Remove the battery base (see step 13 on
ENGINE REMOVAL ).
- Remove the radiator (see
RADIATOR REPLACEMENT
).
- Disconnect the front engine mount control solenoid valve tube (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Support the engine with a jack and a wood block under the oil pan.
- Remove the front engine mount stop (B), then remove the front engine mount bolt (C).
- Remove the front engine mount (D).
- Install the front engine mount in the reverse order of removal.
- Remove the battery (seeBATTERY REMOVAL AND INSTALLATION
).