Shift Lock Solenoid Replacement

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) in the SRS before doing repairs or service.

1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL  ).
2. Remove the screws (A) securing the shift lock solenoid (B), then remove the shift lock solenoid.
   Fig 1: Shift Lock Solenoid And Fasteners With Torque Specifications

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the shift lock solenoid plunger (C) and plunger spring (D) from the shift lock solenoid, and replace the shift lock solenoid.
4. Install the shift lock solenoid plunger and plunger spring in the new shift lock solenoid.
5. Apply silicone grease to the tip (E) of the shift lock extension, and install the shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock extension.
6. Secure the shift lock solenoid with the screws.
7. Install the shift lever assembly (see SHIFT LEVER INSTALLATION  ).