CDs cannot be inserted and/or ejected
- Press the OPEN/CLOSE button to open the navigation display.
- Remove the navigation display.
- Check voltage on CD changer connector A (18P) terminal No. 12 to body ground.
Is there battery voltage?
YES - Go to step 4.
NO - Check the connections at the CD changer. If OK, replace the CD changer.
- Disconnect the CD changer connector A (18P) and Navigation display connector B (10P). Check for continuity between connector A terminal No. 12 and connector B terminal No. 9.
Is there continuity?
YES - Substitute a known-good navigation display. If the problem is repaired, replace the navigation display.
NO - Repair open in the wire between the CD change and the navigation display.