Power Mirror Switch Test/Replacement

Disconnect the 13P connector from the power mirror switch.

Fig 1: Disconnecting 13P Connector From Power Mirror Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 2: Switch Terminals Position Description Table - Mirror Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Defogger Switch

Fig 3: Switch Terminals Position Description Table - Defogger Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, remove the screws and replace the power mirror switch.