LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Ridgeline RTL >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System Components >> Steering Angle Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.
  1. Make sure the ignition switch is OFF.
  2. Remove the steering wheel (see STEERING WHEEL REMOVAL ), and steering column cover (see step 6 under STEERING COLUMN REMOVAL AND INSTALLATION ).
  3. Remove the combination switch assembly (see step 8 under STEERING COLUMN REMOVAL AND INSTALLATION ).
  4. Remove the wiper/turn switch (A).
    Fig 1: Removing Wiper/Turn Switch
    G05592970Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Replace the combination switch body complete (B).
  6. Install the combination switch in the reverse order of removal.
    NOTE: Do not remove the steering angle sensor from the combination switch body.
  7. Do the steering angle sensor center point writing (see STEERING ANGLE SENSOR CENTER POINT WRITING  ).
scientia non olet · About LEMON Manuals