LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Testing and Inspection >> Programming and Relearning >> PCM Updating and Substitution For Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PCM Updating and Substitution For Testing

PCM Updating and Substitution for Testing

Special Tools Required
^ Honda diagnosis system (HDS) tablet tester
^ Honda interface module (HIM) and an iN workstation with HDS and CM update software
^ HDS pocket tester
^ GNA600 and an iN workstation with HDS and CM update software

Use this procedure when you have to substitute a known-good PCM in a troubleshooting procedure. Update the PCM only if the PCM does not already have the latest software loaded.

NOTE: Do not turn the ignition switch to LOCK (0) while updating the PCM. If you turn the ignition switch to LOCK (0) before completion, the PCM can be damaged.
scientia non olet · About LEMON Manuals