Cross-Member: Service and Repair

Middle Cross-member Gusset Replacement

2-door

NOTE: Take care not to scratch the body.

1. Remove the rear side trim panel. Service and Repair

2. Pull back the rear part of the carpet as needed.

3. Remove the bolts (A, B), then remove the middle cross-member gusset (C).






4. Install the gusset in the reverse order of removal. When installing the mounting bolts for the middle cross-member gusset (A), torque the mounting hardware in the sequence shown. If the mounting bolts are not torqued in this sequence, damage to the quarter panel will occur.