Air Register: Service and Repair

Dashboard Vent Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- The driver's vent is shown, the passenger's vent is similar.

1. Apply protective tape around the vent to prevent damage. Carefully insert the appropriate trim tool next to the clips, and detach the clips by prying on the vent (A). Take care not to scratch the dashboard or the related parts.

2. Pull out on the vent, then remove it.

3. Install the vent by pushing the clips into place securely.