Engine Mount Control Unit Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
Remove the driver's under-dash fuse/relay box.
Disconnect the engine mount control unit 16P connector (A).

Fig 1: Engine Mount Control Unit 16P Connector And Engine Mount Control Unit With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the engine mount control unit (B).
Install the parts in the reverse order of removal.
Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).