Front Power Window Motor Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The holes for the mounting screws in a new power window motor are not threaded. The screws cut threads in the holes the first time they are installed.

Install the power window motor (A) onto the regulator (B) as shown, and tighten the screws (C) until the screw head contacts with the linkage.
NOTE:
- Keep the screws perfectly straight while screwing them in.
- Do not use air tools or impact wrenches.
- Do not use any other screws; these screws are designed to cut the threads.
  
  Fig 1: Identifying Power Window Motor, Regulator With Mounting Screws
  Courtesy of AMERICAN HONDA MOTOR CO.,INC.
Loosen the screws, and retighten the screws to specified torque.
Install the door glass and regulator (see FRONT DOOR GLASS AND REGULATOR REPLACEMENT ).
Install the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).