Cruise Control Cannot Be Set (With Cruise Control)

Cruise control cannot be set

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Check the No. 24 (10 A) fuse in the under-dash fuse/relay box.

3. Do the cruise control combination switch test. Cruise Control Combination Switch Test (With Cruise Control)

4. Do the cruise control input test. Component Tests and General Diagnostics

Also check for:

- Poor ground G101 (A/T model) or G401 (M/T model)
- Open circuit, loose or disconnected terminals: YEL/RED, RED wire