VSA OFF Switch Test

Turn the ignition switch to LOCK (0).
Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Remove the VSA OFF switch (A) by pushing from the back side of the instrument panel.

Fig 1: Identifying VSA OFF Switch And Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between VSA OFF switch 6P connector terminals No. 1 and No. 6. There should be continuity when the button is pressed, and no continuity when the button is released.

Fig 2: Checking Continuity Between VSA OFF Switch 6P Connector Terminals No. 1 And No. 6
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between VSA OFF switch 6P connector terminals No. 2 and No. 3. There should be continuity at all times.

Fig 3: Checking Continuity Between VSA OFF Switch 6P Connector Terminals No. 2 And No. 3
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the VSA OFF switch in the reverse order of removal.