'00-03 Models: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Honda S2000, 2004 Honda S2000, 2003 Honda S2000, 2002 Honda S2000, and 2001 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ABS modulator-control unit, then tighten the two 6 mm nuts.
- Align the connecting surface of the ABS modulator-control unit 25P connector.
- Push in the lock of the ABS modulator-control unit 25P connector until you hear it click into place, then connect the connector.
- Bleed the brake system, starting with the front wheels (see BRAKE SYSTEM BLEEDING ).
- Start the engine, and check that the ABS indicator goes off.
- Test-drive the vehicle, and check that the ABS indicator does not come on.