LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2010 >> Element LX, 2.4 YH2, Standard >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 1 Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ECT Sensor 1 Replacement

  1. Remove the air cleaner (see AIR CLEANER ELEMENT INSPECTION/REPLACEMENT ).
  2. Remove the EVAP canister purge valve (see EVAP CANISTER PURGE VALVE REPLACEMENT ).
  3. Remove the under-hood fuse/relay box bolt, and move the assembly aside.
  4. Drain the engine coolant (see COOLANT CHECK ).
  5. Disconnect the ECT sensor 1 connector (A).
    Fig 1: ECT Sensor 1, Connector And O-Ring With Torque Specifications
    G06267512Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Remove ECT sensor 1 (B).
  7. Install the parts in the reverse order of removal with a new O-ring (C) coated with clean engine oil, then refill the radiator with engine coolant (see COOLANT CHECK ).
scientia non olet · About LEMON Manuals