Navigation Display Unit Removal/Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

SRS Components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

Remove the center panel (see PASSENGER'S MIDDLE PANEL REMOVAL/INSTALLATION ).
Remove the screws from the navigation display unit (A).

Fig 1: Locating Navigation Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (A), and remove the navigation display unit (B).

Fig 2: Locating Connectors And Navigation Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the navigation display unit in the reverse order of removal.