LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2010 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Navigation System) >> System Description >> Interface Dial Connector for Inputs and Outputs >> Interface Dial 5P Connector
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Interface Dial 5P Connector

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Interface Dial 5P Connector
G06971101Courtesy of AMERICAN HONDA MOTOR CO., INC.

Interface Dial 5P Connector 

TERMINALS DESCRIPTION CHART

Cavity Wire Color Terminal Name Description Voltage (about) Symptom
1 Not used Not used -- -- --
2 PUR ACC Power source for interface dial Battery voltage at ACC (I) If open: You can not operate navigation system. If short to ground: Blows fuse No.C13 (7.5 A) in the driver's under-dash fuse/relay box.
3 BLK GND Ground for interface dial (G501) 0V If open: You can not operate navigation system.
If short to ground: You can not operate navigation system.
4 BLK(1) JOG SH Shield for terminal No. 5 -- --
5 BLU JOG Interface dial operation signal 0-5 V pulses If open: You can not operate navigation system.
If short to ground: You can not operate navigation system.
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the circuit diagram.