LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2010 >> Fit Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist System) Components >> VSA Modulator-Control Unit Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSA Modulator-Control Unit Removal and Installation: Installation

  1. Install the VSA modulator-control unit onto the bracket.
  2. Install the bracket with the VSA modulator-control unit to the body.
  3. Reconnect the six brake lines, then tighten the flare nuts to the specified torque.
  4. Align the connecting surface of the VSA modulator-control unit 36P connector to the VSA modulator-control unit.
  5. Pull up the lever of the VSA modulator-control unit 36P connector, then confirm the connector is fully seated.
  6. Install the washer reservoir (see WASHER RESERVOIR REPLACEMENT ).
  7. Bleed the brake system (see BRAKE SYSTEM BLEEDING ).
  8. Do VSA MODULATOR-CONTROL UNIT UPDATE  .
  9. Do VSA SENSOR NEUTRAL POSITION MEMORIZATION  procedure.
scientia non olet · About LEMON Manuals