Without navigation

WARNING: This page is about a different car, the 2013 Honda Fit and 2012 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying USB Adapter Unit Connector Terminals - Without Navigation

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying USB Adapter Unit Connector A (14P) Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity

Wire color

Connects to

ORN

Audio unit or Audio-navigation unit (+ B)

BLU

Audio unit or Audio-navigation unit (SYS ACC)

GRY⁽¹⁾

Shield for terminals No. 9 and No. 10(GA-NET BUS SH)

PNK⁽¹⁾

Shield for terminals No. 5, No. 6, No. 13, and No. 14(GA-NET AUDIO SH)

BRN

Audio unit or Audio-navigation unit (AUDIO R+)

WHT

Audio unit or Audio-navigation unit (AUDIO L+)

YEL

Audio unit or Audio-navigation unit (GA-NET BUS +)

A10

GRN

Audio unit or Audio-navigation unit (GA-NET BUS-)

A11

BLK

Audio unit or Audio-navigation unit (GND)

A13

RED

Audio unit or Audio-navigation unit (AUDIO R-)

A14

LT BLU

Audio unit or Audio-navigation unit (AUDIO L-)

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.

Fig 3: Identifying USB Adapter Unit Connector B (5P) Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity	Wire color	Connects to
B1	--	USB adapter (USB VBUS)
B2	--	USB adapter (USB DATA-)
B3	--	USB adapter (USB DATA+)
B4	--	USB adapter (USB GND)
B5	--	Shield for terminals No. 1, No. 2, No. 3, and No. 4 (USB SH)