Speaker Test/Replacement: Tweeter
- Insert a flat-tip screwdriver in the groove (A), and carefully pry the tweeter grille (B).NOTE: Be careful not to damage the tweeter grille and the dashboard.
- Disconnect the 2P connector (C) from the tweeter.
- Check the capacitor condition. If any malfunction is found, replace the tweeter.
- Remove the tweeter speaker (A) from the speaker grille (B).
- Measure the resistance between the soldered joint and terminal No. 2. There should be about 4 fi.
- If the resistance is not as specified, replace the tweeter speaker.
- Install the tweeter speaker in the reverse order of removal.
NOTE:
Align the tweeter speaker connector with the cut-out on the speaker grille.