HandsFreeLink Control Unit 28P Connector

WARNING: This page is about a different car, the 2013 Honda Fit and 2012 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Handsfreelink Control Unit 28P Connector Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity

Wire Color

Connects to

BLK

Body ground to G501 (GND)

GRN

HFL switch (STRG SW)

BRN

Audio unit (HFL MUTE)

PNK

Audio unit (TELEM SIG +)

GRY⁽¹⁾

Shield for terminals No. 13 and No. 14 (MIC SH)

LT GRN

HFL microphone (MIC SIG)

PUR

HFL microphone (MIC GND)

PNK

No. 1 (10 A) fuse in the under-dash fuse/relay box (+ B)

ORN

No. 14 (7.5 A) fuse in the under-dash fuse/relay box (ACC)

LT GRN

B-CAN bus line

BLU

Audio unit (HFL ICON)

BLU

Audio-navigation unit (TELEM SIG -)

GRY⁽¹⁾

Shield for terminals No. 11 and No. 25 (TELEM SIG SIG)

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.