Cargo Area Light Test/Replacement

WARNING: This page is about a different car, the 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Open the hatch.
Carefully pry out the cargo area light (A).
Cargo Area Light: 5 W

Fig 1: Identifying Cargo Area Light And 2P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 2P connector (B) from the light.
Check for continuity between the terminals No. 1 (+) and No. 2 (-). There should be continuity. If there is no continuity, check the bulb. If the bulb is OK, replace the cargo area light assembly.
Install the light in the reverse order of removal.