LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless/Power Door Locks/Security System >> Symptom Troubleshooting >> Security Alarm System Will Not Arm >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Alarm System Will Not Arm: Notes

NOTE: Before troubleshooting, check the B-CAN DTCs. If any DTC is indicated, refer to the B-CAN System Diagnosis Test Mode A, and troubleshoot the indicated DTCs first. (See TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
  1. Turn the ignition switch to ON (II).
  2. Select SECURITY from the BODY ELECTRICAL menu, and enter the DATA LIST with the HDS.
  3. Check the ON/OFF information in the DATA LIST when each switch is operating.
    • TRUNK LID/TAILGATE SWITCH
    • SECURITY HOOD SWITCH
    • DRIVER'S DOOR LOCK KNOB SWITCH (UNLOCK)
    • FRONT PASSENGER'S DOOR LOCK KNOB SWITCH (UNLOCK)
    • LEFT REAR DOOR LOCK KNOB SWITCH (UNLOCK)
    • RIGHT REAR DOOR LOCK KNOB SWITCH (UNLOCK)
    • DRIVER'S DOOR SWITCH
    • FRONT PASSENGER'S DOOR SWITCH
    • LEFT REAR DOOR SWITCH
    • RIGHT REAR DOOR SWITCH
    • DRIVER'S DOOR KEY CYLINDER SWITCH (LOCK)
    • DRIVER'S DOOR KEY CYLINDER SWITCH (UNLOCK)

    Is each switch's information OK? 

    YES  - Intermittent failure, the system is OK at this time.

    NO  - Troubleshoot the indicated circuit: