ABS Modulator - Control Unit Removal and Installation: Installation
- Install the ABS modulator-control unit onto the bracket.
- Install the bracket with the ABS modulator-control unit to the body.
- Reconnect the six brake lines, then tighten the flare nuts to the specified torque.
- Align the connecting surface of the ABS modulator-control unit 25P connector to the ABS modulator-control unit.
- Lower the lock of the ABS modulator-control unit 25P connector, then confirm the connector is fully seated.
- Install the washer reservoir (see WIPER ARM REPLACEMENT ).
- Bleed the brake system (see BRAKE SYSTEM BLEEDING ).