VSA Modulator-Control Unit Inputs and Outputs For 36P Connector
WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
TERMINAL DESCRIPTION TABLE
| Terminal number | Wire color | Terminal sign | Description | Signal |
|---|---|---|---|---|
| 1 | RED | CAN-L | F-CAN communication circuit | - |
| 3 | BLU | K-LINE | Communication with HDS | |
| 4 | GRY | RR-GND | Detects right-rear wheel speed sensor signal | |
| 6 | GRY | FL-GND | Detects left-front wheel speed sensor signal | |
| 8 | RED | RL-GND | Detects left-rear wheel speed sensor signal | |
| 9 | PUR | SVCC | Power source for the steering angle sensor | With ignition switch in ON (II): about 5.0 V |
| 10 | PNK | FR-GND | Detects right-front wheel speed sensor signal | - |
| 11 | BRN | STR-A | Detects steering angle sensor signal | |
| 12 | WHT | FSR+B | Power source for the fail-safe relay | Battery voltage (about 12 V) at all times |
| 13 | RED | MR+B | Power source for the motor relay | Battery voltage (about 12 V) at all times |
| 14 | WHT | CAN-H | F-CAN communication circuit | - |
| 18 | LT BLU | RR+B | Detects right-rear wheel speed sensor signal | |
| 19 | ORN | FL+B | Detects left-front wheel speed sensor signal | |
| 21 | YEL | RL+B | Detects left-rear wheel speed sensor signal | - |
| 23 | GRN | FR+B | Detects right-front wheel speed sensor signal | |
| 25 | RED | WEN | Detects write enable signal | |
| 26 | LTBLU | STR-D | Detects steering angle sensor signal | |
| 27 | GRN | STR-B | Detects steering angle sensor signal | |
| 30 | PUR | IG1 | Power source for activating the system | With ignition switch in ON (II): battery voltage (about 12 V) |
| 34 | BLU | SGND | Ground for the steering angle sensor | - |
| 35 | BLK | GND | Ground for the VSA modulator-control unit | Continuity |
| 36 | BLK | MR-GND | Ground for the pump motor | Continuity |