Wheel Speed Sensor Replacement: Front
WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to LOCK (0).
- Remove the grommet (A), then disconnect the wheel speed sensor connector (B).
- Remove the bracket (C), the clip (D), and the stay (E).
- Remove the bolts and the wheel speed sensor (F).
- Install the wheel speed sensor in the reverse order of removal, and note these items:
- Do not twist the sensor wires.
- If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
- Make sure the grommet is installed properly.
- Make sure there is no debris in the sensor mounting hole.