Heater Control Panel Removal/Installation
- Remove the center panel (see AUDIO UNIT REMOVAL/INSTALLATION
).
- Remove the control cables from the blower/heater unit (see RECIRCULATION CONTROL CABLE ADJUSTMENT
).
- Pull out the right portion of the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION
).
- Remove the screw, and pull out the heater control panel (A) to access the electrical connectors.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Disconnect the connectors, and remove the heater control panel along with the control cables.
- Install the control panel in the reverse order of removal. After installation, operate the controls to make sure they work properly.