Shift Lever Disassembly/Reassembly
WARNING: This page is about a different variant/trim than selected.
Apply silicone grease to movable joints of the shift lock mechanism, the shift lever, and the lock pin rod. Keep the connector terminals free of silicone grease.
NOTE:
- Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands and gloves.
- Do not wipe off the grease that is applied to the portion of the shift lever marked with an asterisk (*) when you disassemble or assemble it because a special grease is used.