Dashboard Side Panel Removal/Installation

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program, 888-424-6857

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

NOTE:

Take care not to scratch the dashboard or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
The passenger's dashboard side panel is shown; the driver's dashboard side panel is similar.

Remove the passenger's dashboard side panel (A).
1. Pull out the door opening seal (B) as needed.
2. Gently pry the rear edge of the panel with the appropriate trim tool to detach the hooks (C).
  
  Fig 1: Removing Passenger's Dashboard Side Panel
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the panel in the reverse order of removal, and push the hooks into place securely.