Accelerator Pedal Module Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the driver's dashboard lower cover (see FUSE ACCESS PANEL REMOVAL/INSTALLATION ).
Disconnect the APP sensor 6P connector (A).

Fig 1: APP Sensor 6P Connector With Torque Specifications And Accelerator Pedal Module
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the accelerator pedal module (B).
NOTE:
- The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
- If the accelerator pedal module is dropped, replace it.
Install the parts in the reverse order of removal.