LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Insight Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Front Impact Sensor Replacement >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Impact Sensor Replacement: Removal

  1. Do the 12 volt battery terminal disconnection procedure (see USING THE GR8 BATTERY DIAGNOSTIC STATION ), then wait at least 3 minutes before starting work.
  2. Remove the front inner fender (see FRONT INNER FENDER REPLACEMENT ).
  3. Disconnect the engine compartment wire harness 2P connector (A) from the front impact sensor (B).
    Fig 1: Identifying Engine Compartment Wire Harness 2P Connector, Front Impact Sensor And Torx Bolt
    G08095579Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the TORX bolt (C) using a TORX T30 bit, then remove the front impact sensor.
scientia non olet · About LEMON Manuals