| Excessive engine oil consumption |
- Check for oil leaks.
- Check for worn valve guide(s) (see VALVE INSPECTION
) or worn valve stem seal(s) (see VALVE, SPRING, AND VALVE SEAL REMOVAL
).
- Check for damaged or worn piston ring(s) (see PISTON RING REPLACEMENT
).
- Check for damaged or worn engine internal parts (cylinder wall, pistons, etc.) (see BLOCK AND PISTON INSPECTION
).
|
Check the maintenance records, worn out engine oil will burn off at higher rate |
| Low oil pressure indicator does not come on with the ignition switch in ON (II) |
- Do the low oil pressure indicator circuit troubleshooting (Short) procedure (see LOW OIL PRESSURE INDICATOR CIRCUIT TROUBLESHOOTING (SHORT) LOW OIL PRESSURE INDICATOR CIRCUIT TROUBLESHOOTING (OPEN) ).
- Test the oil pressure switch (see OIL PRESSURE SWITCH TEST ).
|
A wire shorted to ground between the PCM and the oil pressure switch |
| Low oil pressure indicator stays on |
- Check the engine oil level.
- Do the low oil pressure indicator circuit troubleshooting (Open) procedure (see LOW OIL PRESSURE INDICATOR CIRCUIT TROUBLESHOOTING (OPEN) ).
|
An open in the wire between the PCM and the oil pressure switch |