Speaker Test/Replacement: Tweeter

Carefully pry the tweeter grille (A) out of the dashboard. Be careful not to damage the tweeter grille and the dashboard.

Fig 1: Identifying Tweeter Grille And Speaker Grill
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 2P connector (B) from the tweeter.
Remove the tweeter speaker (A) from the speaker grille (B).

Fig 2: Identifying Tweeter Speaker And Speaker Grille
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check the capacitor (C) condition. If any damage is found, replace the tweeter.
Measure the resistance between the tweeter (A) terminal No. 2 and the outside terminal of the capacitor. There should be about 4 Ω.

Fig 3: Measuring Resistance Between Tweeter Terminal No. 2 And Outside Terminal Of Capacitor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the resistance is not as specified, replace the tweeter.
Install the tweeter in the reverse order of removal.