VSA Modulator-Control Unit Inputs and Outputs for 36P Connector (Connector Disconnected)

Fig 1: Identifying VSA Modulator-Control Unit 36P Connector Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Terminal number	Wire color	Terminal sign	Description	Signal
1	RED	F-CAN L	F-CAN communication circuit	--
3	BLU	K-LINE	Communication with HDS	Pulse voltage (digital signal)
4	GRY	RR-GND	Detects right-rear wheel speed sensor signal	--
6	GRY	FL-GND	Detects left-front wheel speed sensor signal
8	RED	RL-GND	Detects left-rear wheel speed sensor signal
9	PUR	SVCC	Power source for the steering angle sensor
10	PNK	FR-GND	Detects right-front wheel speed sensor signal
11	BRN	STR-A	Detects steering angle sensor signal
12	WHT	FSR +B	Power source for the fail-safe relay	Battery voltage (about 12 V) at all times
13	RED	MR +B	Power source for the motor relay	Battery voltage (about 12 V) at all times
14	WHT	F-CAN H	F-CAN communication circuit	--
18	LT BLU	RR +B	Detects right-rear wheel speed sensor signal
19	ORN	FL +B	Detects left-front wheel speed sensor signal
21	YEL	RL +B	Detects left-rear wheel speed sensor signal
23	GRN	FR +B	Detects right-front wheel speed sensor signal
26	LT BLU	STR-Z	Detects steering angle sensor signal
27	GRN	STR-B	Detects steering angle sensor signal
30	PUR	IG1	Power source for activating the system	With ignition switch ON (II): battery voltage (about 12 V)
34	BLU	SGND	Ground for the steering angle sensor	--
35	BLK	GND	Ground for the VSA modulator-control unit	Continuity to ground
36	BLK	MR-GND	Ground for the pump motor	Continuity to ground