System Links

WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Enter this screen by selecting Self-Diagnosis Mode from the Select Diagnosis Items menu. The message at the bottom of the screen flashes indicating the diagnostic is running.

Fig 1: Identifying Screen Display - Select Diagnosis Items Menu
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Select the icon you want to diagnose, then select or view the details of that diagnostic function.

The System Links function runs automatically. The diagnostic tests the following:

Most of the wires connecting the navigation components are shown in the block diagram.
The results from the various components shown in the block diagram.
The microphone is tested by listening to the bong sound produced by the audio-navigation unit from the speakers when the diagnostic is started. This requires that the audio system be operating normally.

When the diagnostic finishes, the icons turn different colors based on their test status. The color definitions are shown following, and can also be seen by selecting Help on the System Links screen.

The indication on the screen may not change until you exit and reenter the Self-Diagnosis mode. In some cases, you may have to restart the engine for the indication to change. After you repair the affected component or harness, repeat this diagnostic.

Each icon color is explained in the table below.

ICON COLORS DESCRIPTION TABLE

Icon Colors	Description
Green	The System ran a diagnosis, and the results are OK.
Red	Errors that require replacement of hardware or harness. Examples are connection error or memory diagnosis errors. Troubleshoot for DTCs.
Yellow	Errors that do not require hardware replacement, such as an incorrect DVD.
White	The diagnosis is running. The screen functions are locked out while the diagnosis runs.
Gray	The system cannot automatically check this function. You have to select the diagnosis item and manually do additional testing, like checking the navigation buttons in the Hard Key test. When you complete the Hard Key test and return to the System Links menu, the gray icon turns green.

NOTE: By selecting the HELP icon, you can see a description for each color.